|
DRVcan 1053√
A Kvaser DRVcan is a combined cable, connector and CAN bus driver for the LAPcan / LAPcan II PCMCIA CAN interface. The DRVcans are interchangeable and designed for maximum flexibility and maintainability.
- DRVcan 251 and DRVcan 1050 are for normal, high-speed ISO 11898 CAN bus systems.
- DRVcan Dnopto is also intended for normal, high-speed ISO 11898 CAN bus systems but is equipped with optocouplers.
- DRVcan 1053 and DRVcan 1054 are for fault-tolerant CAN buses (sometimes called "low-speed CAN")
- DRVcan Fi employs optical fiber and is used for special applications. Different physical layers are supported through different product versions.
- DRVcan TnT is used with Truck and Trailers, ISO 11992-1
- DRVcan S is used with Single-Wire CAN (SAE J2411, GMLAN)
- DRVlin is used with the LIN bus. Please note that not note that not all applications listed under Application Support for LAPcan/LAPcan II support the DRVlin.
|
Property
|
Value
|
|
The information herein is subject to change without notice.
|
|
|
Galvanic Isolation
|
No
|
|
Bitrate
|
5-125 kbit/s
|
|
Silent mode
|
Yes
|
|
Error frame generation
|
No
|
|
Error frame detection
|
Yes
|
|
Weight
|
50 g
|
|
On board buffer
|
No
|
|
Maximum message rate, send
|
2500
|
|
Maximum message rate, receive
|
2500
|
|
Sound
|
No
|
|
Clock synchronization
|
N/A
|
|
Dimensions (WxLxH)
|
0x500x0 mm (0.0x19.7x0.0in.)
|
|
|
